The famous NBS 'Aussie Blaster' P/N NBSAussieBlaster11 11 metre 27 MHz telescopic vertical antenna was first manufactured in 1968 for use as a 27.240 MHz CB Radio base antenna. The NBSAussieBlaster11's robust construction with no 'Pop rivets', has a welded coil in position to give excellent electrical contact and reduce noise for sensitive receive applications. 

The NBSAussieBlaster11 "Aussie Blaster" HF 27 MHz CB radio telescopic antenna can be adjusted for 10 metre (10M) amateur band 28.0 - 28.3 MHz or modified for the 15 metre (15M) 21.0 - 21.5 MHz, 20 metre (20M) 14.0 - 14.5 MHz, 40 metre (40M) 7.0 - 7.4 MHz or for those avid enthusiasts the 80 metres (80M) 3.5 - 4.0 MHz bands.

The NBSAussieBlaster11 "Aussie Blaster" 27 MHz antenna comes disassembled for reduced courier cost and storage. The construction and assembly has been designed for ease of assembly, whilst maintaining effective performance and reduced noise levels.

Our NBSWASupp is precise CN cut from 5mm UV resistant LEXON sheet able to survive in the harshest of environments. Designed for RG58A/U stranded core, solid PE dielectric coaxial cable to be threaded through the holes for support or RG213 stranded core, solid PE dielectric coaxial cable secured by cable ties the NWSWASupp is flexible in capability. Alternatively  ladder line can be woven through the slots.

 

We can also supply a 'military-style' end insulator with length alteration provisioning for frequency adjustment, constructed from cast acrylic.

Ideal for portable operations where frequency is being changed.  Simply wind or un-wind the antennas and lock it in place to adjust the resonant length.

 

A simple and tidy way to store half of the antenna when it is not in use, two are required for dipole and OCF arrays

 

Made from UV resistant cast acrylic sheet  to NBS Antennas specifications.

 

The clear material is less noticeable in the sky than the white or black material and has the same strength

Australian manufactured high visibility with super strength the NBSFLine makes erecting wire antennas or guying your telescopic mast quick, safe and simple.

 

The NBSFLine is alternatively ideal for pulling safety lines into trees, or getting rescue lines over to boats/yachts or for high visibility securing lines such as recommended with the NBSTiltstand. Available per 100 metre roll or alternatively we can supply manufactured, ready-to-go custom length guy wires/secure lines assemblies. Contact us directly for your required solution.

This Australian made polyester cord is 4.5mm diameter is excellent for use as guy rope.  With the internal strands and strong protective outer woven layer it will support over 300Kg.  More than enough for the portable masts even with 15kg payloads  in strong winds.

 

This cord is sold in 100M rolls or in ready made guys in 5, 10, 15, 20, 25M lengths comprising stainless steel snap hooks and either self locking devices or N.A.T.O. Green locking cleats that can be used with gloves and are not effected by snow or ice.