Our range of accessories suit our range of:
  • Tilt-over manual/pneumatic ram masts
  • Telescopic anodised aluminium masts
  • Lattice-style masts
These include temporary drive-on under-wheel stands through to permanent concrete secured mount pads. Manufactured in Australian to suit our range of high quality masts, customisation to suit your application, terrain, mounting requirements or equipment mounting allows our solutions to be flexible and robust, suitable for a wide range of industries.
Our range of accessories include:
  • Drive-on under wheel mount base - fixed or tilt-over
  • Tilt-over mast antenna/equipment carriages
  • Hand-operated carriage winch
  • Hydraulic 'pump-up' ram - suits tilt-over mast
  • Guy wires and guy rings
  • Multi-surface mounting
  • Antenna or equipment mount structures for top of mast
  • Insulators - egg or flat
  • Autolock/tensioners for guy wires
  • Custom-manufactured mounting hardware

Contact us today for all enquiries on sales@nbsantennas.com.au or call us on 0402 930 581.

NBS Drive-on under wheel mount - NBS55stand

Our NBS55stand drive-on, under wheel, braced mount base suits our:
  • NBS2554 mast - 2 metres packed, 4 section, 7 metres extended length 
  • NBS3554 mast - 3 metres packed, 4 section, 11 metres extended length
  • Or any suitable mast base section with a 55mm O.D.
Constructed of fully-welded fully-galvanised finish or on request powdercoated finish (specify colour) with support bracing our NBS55stand allows for quick-install, secure footing installations for remote or short-term mast requirements such as emergency lighting, quick-reaction communication applications for emergency services, or quick-install monitoring.
We also manufacture 'drive-on' mount bases for our larger 60mm O.D. telescopic base section masts see NBS61stand and a NBS68stand heavy-duty drive-on mount base for 68mm O.D. base section telescopic masts. Contact us for more information.

NBS Drive-on under wheel mount - NBS61stand

Our NBS61stand drive-on, under wheel, braced mount base suits our:
  • NBS2605 mast - 2 metres packed, 5 section, 8.5 metres extended length 
  • NBS 3605 mast - 3 metres packed, 5 section, 13.8 metres extended length
  • Or any suitable mast base section with a 60mm O.D.
Constructed of fully-welded fully-galvanised finish or on request powdercoated finish (specify colour) with support bracing our NBS61stand allows for quick-install, secure footing installations for remote or short-term mast requirements such as emergency lighting, quick-reaction communication applications for emergency services, or quick-install monitoring.
We also manufacture 'drive-on' mount bases for our larger heavy-duty 68mm heavy-duty telescopic masts. Contact us for more information.

NBS Drive-on under wheel mount - NBS68stand

Our NBS68stand drive-on, under wheel, braced mount base suits our:
  • NBS3686 mast - 3 metres packed, 6 section, 15 metres extended length
  • Or any suitable mast base section with a 68mm O.D.
Constructed of fully-welded fully-galvanised finish or on request powdercoated finish (specify colour) with support bracing our NBS68stand allows for quick-install, secure footing installations for remote or short-term mast requirements such as emergency lighting, quick-reaction communication applications for emergency services, or quick-install monitoring.
We also manufacture 'drive-on' mount bases for our 60mm O.D. telescopic base section masts see NBS61stand and a NBS55stand for our 55mm O.D. base section telescopic masts. Contact us for more information.

NBS Drive-on under wheel tilt stand

The NBSTiltstand is our tilt-access under wheel mount base for our telescopic section masts erection. The tilt-over design allows for full install of your antenna or equipment onto the top section of your telescopic mast and then simply walk the mast up to the vertical orientation.
The design of the NBSTiltstand allows the use of your vehicle as the anchor of the base, ensuring no movement of your mast, base and equipment once erected. Guy supports or a securing line is required to ensure no movement of your mast once erected. 
Our under wheel NBSTiltstand is supplied in a flat-pack configuration, ideal for vehicle boot storage or reduced storage in your shed, warehouse or office. Simply assemble the pivot arm to the base, slide through the wheel angled braces, drive your vehicle onto the base, attach your securing line/s, insert your telescopic mast into the mount tube and tilt your mast up and its ready to go.
Alternatively your can extend the angled braces and utilised sandbags, weights or bolt the base plate to a concrete slab or secure horizontal surface. The NBSTiltstand can be fitted onto an angled surface, but additional guy wire supports or stays will be required.

Long-term mount base for tilt-over mast

Our long-term concrete secure mount base for our NBS Tilt-over Mast or NBS Hydraulic Tilt Mast is ideal for long-term communications, lighting equipment or any requirement where long-term secure mounting is required.

Insulating guy wire securing - available in multiple constructions

Out Lattice-style sectional mast with high tension guy wires, secured to each corner for adequate support. 

We recommend guy wire securing at each section to ensure adequate support of your total structure to avoid mechanical movement that can damage your mast structure and installed equipment. Our lattice-style mast sections are available in 3.0 metre sections.

Custom manufactured accessories

Our Australian-based manufacturing facility allows for custom manufacturing of our range of accessories to suit your installation requirements, mounting terrain or specialised equipment mounting.

Utilising state-of-the-art CAD design, CN machining and in-house welding and fabricating, NBS masts are suitable for a wide range of industries

The NBSTiltRam is the add-on accessory that allows smooth/safe raising and controlled lowering of your NBSTiltMast. The NBSTiltMast is standard manufactured with the NBSTiltRam fitment brackets in case of later requirements/additions of the hydraulic ram. The NBSTiltRam is rated for a 8000kg weight, which far exceeds the rated level of the NBSTiltMast. The NBSTiltRam is a manually operated hydraulic ram utilising a hand-pump bar.

If you wish to use the NBSTiltMast with an extension bar and the NBSTiltRam to install your antenna/equipment/accessory, we recommend the utilisation of the NBSTiltCarriage + NBSHandwinch to give easy access for maintenance/upgrade or swap-out of your mast-top equipment. For long term, low maintenance requirements you can simply fix the equipment onto the end of your extension pole and lower/raise the mast arm when required, without a carriage or hand winch.