webphotos030.jpg

This versatile wire antenna kit comprises about 45M of NBS 105 antenna wire, 1 clear centre insulator with stainless steel bolts and wing nuts and 2 egg insulators.

The centre insulator with paper covering is so you can see the design more clearly.  Only one insulator is included in the kit

Item: NBSWAK
$55.00
webphotos137.jpg

The famous NBS Aussie Blaster 11 meter 27Mhz vertical.  First manufactured in 1969 for use as a 27.240Mhz Base antenna.  There are no 'Pop rivets' holding this antenna together.  The coil is welded in position to give excellent electrical contact and reduce noise on receive.

 

Shipping is calculated to capital cities and as far north as Brisbane. All other areas have a surcharge.  North Qld, NT and WA levies are in addition to the standard charge.

Item: NBSAussieBlaster11
$132.00
webphotos032.jpg

This 2.12mm Diameter Hard Drawn copper wire is ideal for wire antennas or 100 uses in electronics, Build your own Antenna tuner, traps and coils for example  Copper wire is sold by weight ONLY,  however approximately 30M is 1Kg in weight

Item: NBSCW212
$33.00
webphotos034.jpg

This clear centre insulator is ideal for all wire antennas and is available in Acetal or Black Cast Acrylic.  Both with or without Stainless Steel Bolts washers and wing nuts to connect the antenna legs.  Provision has been made to fit a SO239 plug.  Weave RG58 or RG59 in as a feeder or cable tie RG213 securely.  Run ladder line as a feeder.  Designed for Amateur and Military applications 

Item: NBSWASupp
webphotos035.jpg

This hex beam base plate originally designed for the ODXG  Make your own hex beam, details are on the web.

Item: NBSHBB
$110.00
webphotos051.jpg

This Army cord is 4mm diameter and comes in 100M.  This is the price of 100M

Item: NBSAC4MM
$77.00
004.JPG
This Australian made polyester cord is 4.5mm diameter is excellent for use as guy rope.  With the internat strands and strong protective outer woven layer it will support over 300Kg.  More than enough for the portable masts even with 15kg payloads  in strong winds.
 
This cord is sold in 100M rolls or in ready made guys in 5, 10, 15, 20, 25M lengths comprising stainless steel snap hooks and either self locking devices or Nato Green locking cleats that can be used with gloves and are not effected by snow or ice.
 
Price  is available on request and can be dispatched Australia wide or collected by appointment in Dandenong.
Item: NBSWPC45
$99.00
006.JPG
This Australian made polyester cord is 3.5mm diameter is excellent for use as guy rope.  With the internat strands and strong protective outer woven layer it will support over 200Kg.  More than enough for the portable masts even with 15kg payloads  in strong winds.
 
This cord is sold in 100M rolls or in ready made guys in 5, 10, 15, 20, 25M lengths comprising stainless steel snap hooks and either self locking devices or Nato Green locking cleats that can be used with gloves and are not effected by snow or ice.
 
This cord is also excellent to support wire antennas for permanent or portable radio operations for Amateur Radio operations or emergency service and military use.
 
Price  is available on request and can be dispatched Australia wide or collected by appointment in Dandenong.
Item: NBSWPC35
$88.00
563.JPG

This Black polyester cord is in 100meter polls and is 3mm diameter.  UV resistant and ideal for outside uses.  Australian made.

Item: NBSBPC30
$30.00
570.JPG

Highly visible fly line for use with the NBS Antenna Launcher and weight

Item: NBSFLine
$27.50
584.JPG

NBS Egg Insulators.  Freight discounts apply for quantities over 12.  Phone for details

Item: NBSEGGINS
$1.10
565.JPG

Heavy duty antenna base spring. 114mm tall of 8mm diameter spring steel Base is 40mm diameter with a 1/2 inch whitworth thread both ends.

Item: NBSHDS
$44.00
590.JPG

The 316 Grade stainless steel wire is 1x19 and 1.2mm diameter.  Excellent for wire antennas and is also almost invisible when erected.  If the neighbours do not see it why should they complain.  Fittings are available.  SOLD PER METER.

Phone for shipping costs.

Item: NBSSSW12
$2.20
595.JPG

NBS Antenna wire is 30 strand of tinned copper wire totalling 1.5mm diameter.

 

It is ideal for wire antennas in coastal areas.  SOLD PER METER

Item: NBSAW105
$0.66
610.JPG

The NBS CW112 is an enamelled hard drawn copper wire 1.12mm in diameter and is sold by weight.  Price is for 1Kg  There is about 110 meters per 1Kg.

Item: NBSCW112
$38.50
648.JPG

Allow me to swage the tube for you

Item: NBSSWAGE
$3.30

Freight Rates for Tube

A standard rate applies for up to 12Kg of tube.  The containers for the tube have a cubic volume and there fore a minimum freight charge.

 

The minimum freight charge is $66.00.  Please adjust the shopping cart to reflect this charge.

 

Pick-up at the factory by appointment is advised for small orders.


Phone 0402 930 581 to arrange a pick-up time.

webphotos001.jpg

NBS Aluminium Tube is available in a range of telescopic sizes for repairs and manufacturing antennas.  This aluminium has a host of uses including Medical Labs, Vehicle fuel and oil lines or anywhere a light weight strong tube is needed.

Part numbers for 6.35mm  tube is NBSAT+635 (tube diameter) making it NBSAT635 

Price is for a 2.75meter length of sturdy 1.42mm walled tube

Item: NBSATxxx
Antennas Parts and Aluminium